Smaller Spas Lose Heat Fast Without the Right Lid
A two-person inflatable or portable spa can drop several degrees overnight if the cover doesn’t sit flush against the tub walls. That wasted heat means longer reheat cycles, higher electric bills, and more chemical evaporation. If you’ve been dealing with a warped, ill-fitting, or missing lid, finding the right compact hot tub cover for two people is one of the quickest fixes for keeping your water warm and clean between soaks. But not every cover works with every tub shape, so measuring your spa’s internal dimensions before ordering is the single most important step you can take.
This roundup pulls together 9 options from brands like CosySpa, Kipiea, StorMaster and more, spanning inflatable lids, weatherproof cap-style protectors, and full-coverage PVC designs. Prices range from $16.22 to $72.98, so there’s something here whether you’re on a tight budget or willing to spend more for a thicker seal. Some of these covers are brand-specific replacements (the Mosener oval, for example, only fits Mosener tubs), while others list broader compatibility with popular inflatable spa lines. We’ve broken down the key specs, materials, and fit details below so you can match a cover to your exact tub. If you’re also looking at affordable protective options, you might want to check out our guide on easy-setup hot tub covers under 30 dollars. Owners shopping for something sturdier may also appreciate our picks for durable hot tub covers under 75 dollars.
Pros
- Purpose-built for Mosener oval inflatable hot tubs, removing the compatibility uncertainty that comes with generic or universal-fit covers
- Oval 75 x 47 inch dimensions provide full top coverage for the listed 1-2 person Mosener spa shell
- Lightweight lid design makes daily cover-on, cover-off handling much easier than rigid foam spa covers
- Listed waterproof and weatherproof construction may help protect the spa from rain, leaves, insects, and general outdoor exposure
- Energy-saving full-coverage design can help retain water temperature and potentially reduce electricity costs from the spa heater running less frequently
Cons
- Explicitly not compatible with all inflatable hot tubs - this cover is listed as fitting only Mosener brand spas, so owners of Coleman, Intex, Bestway, or other inflatable tubs should not assume it will fit
- No details are provided about insulation thickness, foam core, or R-value, so energy-saving performance may be limited compared to rigid hard-shell spa covers
- With zero user reviews at this time, there is no independent feedback on long-term durability, waterproofing performance, or real-world fit confirmation
The Mosener Oval Inflatable Hot Tub Cover is a brand-specific replacement lid designed exclusively for Mosener 1-2 person oval inflatable spas. It measures 6'3" x 3'11" (75 x 47 inches) and is listed as a full-coverage, energy-saving protector with waterproof and weatherproof construction. This is not a universal inflatable hot tub cover - Mosener explicitly states it is only compatible with their own hot tubs, which is a critical detail for anyone shopping for a replacement cover for a different brand of inflatable spa.
For Mosener spa owners, this cover addresses the most common daily ownership need: keeping debris, rain, and insects out of the water while helping retain heat between soaking sessions. The oval shape is matched to the Mosener shell geometry, so buyers don't have to worry about a round or square cover leaving gaps along the edges. Full top coverage is important for both cleanliness and energy efficiency, since an uncovered or poorly fitting lid allows heat to escape and forces the heater to work harder and longer.
The listed dimensions of 75 x 47 inches and the extremely thin profile (0.004 inches listed thickness) suggest this is a soft, flexible cover rather than a rigid foam-core spa cover. That's typical for inflatable hot tub lids, which prioritize easy handling and lightweight daily use over the heavy insulation found on permanent acrylic spa hard covers. For a 1-2 person inflatable tub, this lightweight approach makes sense - you're not dealing with a 70-pound foam cover that requires a lifter. You can simply place it on and remove it by hand before and after each soak.
Setup should be straightforward since this is a drop-on lid rather than a hinged or mounted cover. There are no mounting brackets, lifter arms, or hardware to install. The main ownership consideration is verifying that your specific Mosener model matches the listed oval dimensions. If your Mosener spa is a different size or shape variant, even a small mismatch could leave edges exposed or cause the cover to sit improperly. Measuring your spa's top opening before ordering is a smart precaution.
A realistic limitation is the lack of detailed construction specifications. There is no listed foam thickness, foam density, vapor barrier, R-value, or UV-resistance rating in the product data. Buyers in cold climates or snowy regions should understand that a thin inflatable tub cover may not provide the same level of insulation or snow-load resistance as a rigid replacement cover on a permanent spa. Similarly, owners in high-UV environments may want to consider a cover cap or UV protector placed over this lid to extend its service life from sun exposure.
This Mosener oval cover is a practical buy specifically for owners of Mosener 1-2 person oval inflatable hot tubs who need a replacement or spare lid. Before purchasing, confirm your Mosener model uses the oval 6'3" x 3'11" configuration. Owners of Intex, Coleman, Bestway, Lay-Z-Spa, or other inflatable brands should not purchase this cover, as Mosener explicitly states it is not compatible with all inflatable hot tubs. For the right Mosener spa, this cover offers a simple, affordable way to keep the water clean and reduce heat loss between uses.
The Mosener Oval Inflatable Hot Tub Cover measures 6'3" x 3'11" (75 x 47 inches), designed for an oval 1-2 person Mosener spa. Before ordering, measure the top opening of your Mosener inflatable tub to confirm it matches these dimensions. Even within the Mosener brand, different models may have slightly different shell sizes, so verifying the match is important.
This cover is explicitly listed as compatible only with Mosener hot tubs. It is not a universal inflatable spa cover. Owners of other brands - including Coleman SaluSpa, Intex PureSpa, Bestway, or Lay-Z-Spa models - should not assume this cover will fit based on similar-looking dimensions alone. Oval and round shapes are not interchangeable, and even a few inches of difference in length or width can result in poor coverage, exposed edges, and reduced weather protection.
The Mosener cover is listed as waterproof and weatherproof, which suggests it is intended to handle rain, splashing, and general outdoor moisture exposure. However, no specific waterproofing rating, seam-sealing method, or UV-resistance specification is provided in the product data. Buyers should treat these as manufacturer-listed features rather than independently verified performance ratings.
For owners in rainy or snowy climates, a thin inflatable tub cover may accumulate standing water or snow on the surface. Periodically clearing precipitation and ensuring water drains off the cover can help prevent pooling and potential damage. In high-UV climates like the Southwest U.S. or Florida, prolonged direct sun exposure can degrade cover materials over time. A separate cover cap or UV-protective tarp placed over the lid when the spa is not in use for extended periods may help extend the cover's useful life.
One of the practical advantages of an inflatable hot tub cover like this Mosener lid is easy daily handling. Unlike rigid foam spa covers that can weigh 50 to 80 pounds and often require a cover lifter, this lightweight lid can be placed on and removed by hand without assistance. That's a meaningful benefit for solo spa users, older owners, or anyone who doesn't want to wrestle with a heavy cover before every soak.
Since there is no hinge, the entire cover lifts off as a single piece. Storage between uses is simple - you can lean it against a wall, lay it flat nearby, or place it on any clean surface. No cover lifter, mounting brackets, or rear clearance is needed. For daily spa users who soak frequently, this easy on-off handling can make the difference between actually using your hot tub regularly and skipping sessions because the cover is too cumbersome.
Pros
- Equipped with two reinforced side handles for effortless daily placement and lifting
- Lightweight PVC build folds down compactly for seasonal storage in deck boxes or sheds
- Curved inflatable surface encourages rainwater runoff rather than letting water pool in the center
- Upgraded anti-leak air valve helps sustain internal air pressure during routine use
Cons
- Must be inflated to at least 95 percent capacity to achieve its intended 5.2-foot diameter
- Not a rigid safety cover and cannot support the weight of children, pets, or heavy snow loads
- An air pump is not listed as included, requiring owners to supply their own inflation tool
The Huaerle 5.2 Ft Inflatable Hot Tub Cover serves as an insulating, floating bladder specifically engineered for round 4 to 6 person portable and inflatable hot tubs. This style of cover is well suited for homeowners seeking to upgrade or replace an old, deflated insert without replacing their entire exterior vinyl enclosure. By sitting directly over the water surface inside the spa cavity, it forms a protective thermal barrier that helps slow heat loss and prevent excessive water evaporation between soaks.
In outdoor settings, one of the primary challenges for round spa owners is rainwater pooling on soft canvas or vinyl tops, which can stretch fabrics and strain seams. Because this inflatable insert expands upward when properly filled, it creates a gentle dome effect that encourages rain and melted precipitation to shed outward rather than collecting in the center. In addition to aiding moisture management, the barrier keeps leaves, airborne dust, and insects out of the water, which reduces the cleaning burden on your spa filter cartridge.
The cover is manufactured from heavy-duty gray PVC designed to withstand typical outdoor conditions, including ambient moisture and temperature changes. It features reinforced handles on two sides, giving users a secure grip when maneuvering the bladder in and out of the hot tub. Huaerle also incorporates an upgraded anti-leak air valve engineered to simplify inflation and deflation while preventing gradual pressure loss throughout routine heating cycles.
Setting up this lid is straightforward, though hot tub owners will need an electric pump or manual inflator to bring the bladder up to operating pressure. Weighing approximately 4.6 pounds, the cover is significantly easier to lift and reposition than waterlogged traditional foam lids. For seasonal spa owners or those who frequently travel, the cover deflates rapidly and folds down into a compact footprint, making it easy to store on a shelf or inside a deck box without demanding excess garage space.
Hot tub owners must keep realistic operational boundaries in mind before purchasing an inflatable bladder. This product is not a rigid safety cover and cannot support the weight of children, pets, or heavy snow buildup. Furthermore, the manufacturer specifies that the bladder must be inflated to at least 95 percent capacity to reach its true 5.2-foot diameter, meaning under-inflation will leave gaps along the interior perimeter of the tub.
The Huaerle 5.2 Ft Inflatable Cover is a dependable, budget-conscious choice for anyone looking to maintain spa water temperatures and eliminate sagging cover water pockets. Before ordering, carefully measure the interior top diameter of your round spa shell to ensure a 5.2-foot circular profile aligns with your specific tub dimensions.
Achieving an effective seal with an inflatable thermal bladder requires accurate measurement of your hot tub's inner waterline or interior shell opening. The Huaerle cover features an inflated diameter of approximately 5.2 feet (roughly 62.4 inches), making it compatible with many standard round 4 to 6 person inflatable hot tub models.
Full inflation is critical for correct fitment. According to manufacturer guidelines, the cover must be inflated to at least 95 percent of its total capacity. Under-inflating the bladder results in a smaller outer diameter, which creates open gaps around the spa rim where heat and steam can escape. Measure across the widest point of your hot tub interior before purchasing to confirm that a 5.2-foot circle matches your model.
Routine care will help preserve the integrity of the heavy-duty PVC material over multiple seasons of outdoor exposure. Wipe down the cover periodically using mild soap and fresh water to remove any chemical residue, mineral scale, or organic debris transferred from the water surface.
Avoid inflating the bladder to 100 percent tautness on hot, sunny days, as direct solar heat causes air to expand and may place unnecessary stress on the heat-sealed seams. When preparing the cover for off-season storage, ensure the PVC surface is completely clean and dry before folding it to prevent mildew formation during months in storage.
Pros
- Generous 20-inch skirt height provides comprehensive side cabinet coverage for 72x72 inch square hot tubs.
- Adjustable corner buckles and bottom drawstring prevent blowing off during windy storms.
- Integrated side vents help reduce internal condensation buildup beneath the fabric.
- Extremely lightweight at under one pound, making installation and removal effortless for a single person.
- Includes a dedicated storage bag for clean, compact folding when not in use.
Cons
- Does not provide thermal insulation and cannot replace a standard rigid foam hard cover.
- Fixed 72x72 inch square dimensions will not fit larger spas or models with substantial corner curves.
- Lightweight 420D fabric will not support standing water, heavy snow loads, or direct weight on its own.
The CATOTEL Square Hot Tub Cover Cap is a protective weather barrier engineered to drape over an existing insulated hard cover, measuring 72 inches long by 72 inches wide with a 20-inch skirt height. Hot tub owners frequently invest in protective caps to shield expensive rigid vinyl covers from harsh UV breakdown, tree sap, snow accumulation, and airborne dust. This model specifically targets owners of compact square hot tubs who already have a primary thermal hard cover in place and want an extra layer of outdoor defense without spending hundreds of dollars.
Real-world spa care often involves battling seasonal debris, pollen, and persistent moisture that degrades standard vinyl seams. Built with dual side air vents, this protective cap facilitates internal airflow to reduce dampness and condensation beneath the fabric, helping maintain a drier environment over your rigid cover. The generous 20-inch drop height extends down the cabinet perimeter, offering extra splash and dirt protection across both the primary lid and the upper hot tub skirting.
Constructed from 420D waterproof oxford cloth, the fabric offers practical water repellency and wind resistance while weighing less than one pound. To address unpredictable gusty conditions, the perimeter features an adjustable bottom drawstring alongside four corner snap buckles that anchor securely around the cabinet. These fastening points keep the cover cap firmly anchored against lifting winds, while reinforced side grab handles simplify everyday pulling, adjustment, and positioning.
Handling this protective cap requires minimal effort because the 0.93-pound footprint allows a single person to slide it on or off in seconds before and after a soak. When you plan on using the hot tub regularly throughout an evening or weekend, the cover folds down compactly into its provided storage pouch to keep patio spaces organized. Verification of your spa's exterior dimensions before ordering is essential, as the square profile requires an exact match or slightly smaller base to ensure the 20-inch drop sits properly without excessive slack.
Buyers must recognize that this product is strictly a fabric protective cap and provides zero thermal insulation value on its own. It cannot support snow loads, pooled rainwater, or direct weight without the structural support of an underlying foam core hard cover. Additionally, spas equipped with corner-mounted cover lifters or irregular cabinetry shapes may experience clearance friction around the corner buckle points and 20-inch side drops.
For hot tub owners seeking to preserve an existing 72x72 inch insulated hard cover against sun fading, bird droppings, and outdoor grime, the CATOTEL cover cap provides exceptional preventative value. Before purchasing, verify that your rigid spa cover measures no more than 72 inches in length and width, and confirm you have adequate clearance for the 20-inch drop skirt. It serves as a practical, budget-conscious shield to prolong the service life of your primary spa investment.
Careful measurement of your existing spa setup is required before choosing this protector, as it is manufactured specifically for square hot tubs measuring up to 72 inches long by 72 inches wide. The cover features a deep 20-inch vertical skirt drop designed to drape over both your rigid insulated cover and the upper section of the spa cabinet.
This protective cap is not intended to serve as a standalone cover or an insulator. It requires an underlying flat or tapered hard cover to maintain its shape, promote water runoff, and keep heat trapped in the water. Spas with dimensions exceeding 72 inches in either direction will not accommodate this cap, and spas with unusually large corner radiuses may experience loose excess fabric at the corners.
Outdoor spas placed in open backyards or breezy patios often suffer from displaced covers during heavy storms. The CATOTEL cap integrates an adjustable perimeter cinch cord along the bottom hem that can be drawn tight around the spa cabinet.
Complementing the bottom drawstring, four quick-release corner buckle straps click into place to anchor each corner firmly against updrafts. Dual side air vents allow wind gusts to pass through rather than creating a parachute effect, while simultaneously discouraging mold-promoting condensation from settling against the underlying vinyl cover.
Pros
- Direct replacement solution for deflated or damaged factory bladders in square inflatable spas
- Dual-valve design keeps air secure during inflation and dumps air quickly when packing away
- Black exterior helps capture solar heat during outdoor daytime exposure
- Lightweight 5.7-pound build makes daily spa uncovering quick and painless
Cons
- Requires careful measurement of inside spa dimensions, as smaller 48-inch tubs may require under-inflation to sit flat
- Designed strictly as a floating thermal bladder and cannot support snow loads, pets, or sitting
- An air pump is not listed as included, requiring owners to use their own pump or spa blower connection
The Uppernut Inflatable Square Hot Tub Cover serves as a dedicated replacement thermal bladder designed specifically for square portable and inflatable spas. Portable spa owners frequently encounter situations where factory inflatable discs puncture or fail over time, causing the exterior top cover to sag and collect standing rainwater. This replacement insert measures 65 by 65 inches with a 3-inch thickness when fully inflated, fitting square spas measuring 4 to 5.4 feet across. For owners of popular square models from brands such as SaluSpa, Coleman, or Intex, this bladder provides an affordable way to restore proper lid dome height and thermal insulation without replacing the entire fabric cover assembly.
Thermal retention and vapor control are the central functions of this inflatable cover. By resting directly against the water surface, the inflated bladder creates an insulating air barrier that slows heat dissipation and curbs ongoing water evaporation between soaking sessions. In addition to holding warmth inside the tub, the cover features a black surface designed to absorb solar warmth during sunny outdoor exposure, which is particularly useful for backyard owners managing water temperatures in cooler spring or autumn weather. Elevating the center of your spa top also encourages rainwater runoff rather than allowing water to puddle on top of your fabric lid.
The build incorporates heat-retaining material fitted with a leak-resistant dual-layer valve mechanism. Dual-valve assemblies are a practical necessity on inflatable spa equipment because the internal one-way flap stops air from rushing out while you attach or detach an air pump, while the wider secondary port allows fast deflation when packing down. At an overall weight of 5.7 pounds, the insert remains manageable for solo handling every day. The manufacturer notes that the material should not be exposed to water temperatures exceeding 122 degrees Fahrenheit (50 degrees Celsius) or placed near direct flame sources, which fits safely within standard home spa operating temperatures that generally top out at 104 degrees Fahrenheit.
Daily operation and seasonal cleanup remain straightforward due to the flexible, collapsible format. Using the cover involves lifting the lightweight insert off the water before using the spa, then placing it back underneath the zipped or buckled canvas top when you finish. If you plan to close your tub for the winter or pack it up for storage, deflating the bladder takes only a couple of minutes through the quick-release valve. Cleaning requires simply wiping the smooth surface down with a damp cloth and mild soap, then letting it dry thoroughly before folding to prevent mold or mildew from forming in storage.
Prospective buyers need to keep several dimensional and structural considerations in mind. The product is listed to fit square spas ranging from 48 to 65 inches inside dimension, but because the bladder itself measures 65 inches square, owners with smaller 48-inch inner tub dimensions may find the fit very snug and may need to slightly under-inflate the chamber for an even sit. Additionally, this item is an internal floating thermal insert, not a rigid walk-on hard cover. It is not designed to bear external weight, pets, or heavy snow accumulations, and it must be paired with an exterior protective cover to shield the vinyl against sharp debris and severe weather.
The Uppernut Inflatable Square Cover offers an efficient, budget-friendly replacement for anyone dealing with a deflated or punctured factory insert on a compatible square portable spa. It restores water-line insulation, reduces vapor loss, and restores the crowning effect needed to shed rainwater off the top shell. Before purchasing, verify your spa's internal wall-to-wall dimensions to confirm that the 65-inch square profile aligns with your specific tub layout.
Accurate measurement is critical before choosing an inflatable replacement cover. The Uppernut square cover measures 65 inches in length, 65 inches in width, and 3 inches in thickness when fully inflated. The manufacturer lists compatibility for 4 to 6-person square portable hot tubs with inner dimensions spanning 4 to 5.4 feet (48 to 65 inches).
To ensure a proper fit, measure across the inside water-line of your hot tub from interior wall to interior wall, rather than measuring the exterior cabinet or outer rim. If your spa interior is close to 48 inches, the bladder will fit very tightly against the side walls, and adjusting the air pressure downward slightly can help it rest flat against the water. For tubs measuring closer to 60 to 65 inches internally, the cover provides full perimeter coverage across the water surface.
Proper inflation and maintenance will help protect the longevity of the bladder material. The cover utilizes a two-tier valve system: the inner valve features a one-way stopper for standard inflation without air loss, while the outer base unscrews completely for rapid air release during deflation.
Always inflate the cover to a firm but pliable level, taking care not to over-pressurize the seams, especially if the spa water is hot or the tub is exposed to direct afternoon sun where heat causes air expansion. Never subject the material to water temperatures higher than the listed 122 degrees Fahrenheit limit. When cleaning, rinse off any accumulated chemical residue or splash marks with clean water, wipe with a soft microfiber cloth, and allow the vinyl to air-dry completely before folding it away for off-season storage.
Pros
- Budget-friendly way to add weather and UV protection to an existing hard hot tub cover that's still functional but showing wear
- Drawstring plus center buckle straps provide two methods of securing the cap, which may help in moderately windy conditions
- Lightweight and easy to handle for most users, including older hot tub owners who want minimal effort when covering and uncovering
- Side zipper allows partial access or easier folding and storage without fully removing the cap
- Vented design may help reduce moisture and condensation trapped between the cap and the hard cover
Cons
- This is a cover cap only and cannot provide insulation or be used without a hard insulated cover underneath - buyers expecting a standalone hot tub cover will be disappointed
- Fit depends on accurate measurement of the hot tub or hard cover, and the listed sizes (82x64 to 84x66) may not accommodate all rectangular spas
- Drawstring and buckle closure may not hold up in strong wind or heavy snow conditions without additional securing measures
The Enzeno 85x67-inch cover cap is a protective outer shell designed to go over an existing hard insulated hot tub cover on rectangular spas. It is not a standalone hot tub cover and does not provide insulation, heat retention, or structural support. Instead, it functions as a weather shield - protecting the hard cover underneath from rain, UV damage, dust, pollen, and general outdoor exposure. This makes it a practical consideration for hot tub owners whose hard covers are still structurally sound but starting to show surface wear from sun and weather, and who want to delay the cost of a full replacement cover.
The Enzeno cover cap is listed at 85x67 inches overall and is described as fitting rectangular hot tubs measuring 84x66, 83x65, or 82x64 inches. That slight size difference is intentional - the cap needs to drape over and around the edges of the hard cover. Before ordering, buyers should measure the top surface of their hard cover (not just the spa shell) to confirm the cap will fit with appropriate overhang. A cap that's too small won't cover the edges, while one that's significantly oversized may flap in the wind and collect water in loose folds.
Construction uses 420D Oxford fabric, which is a common mid-weight outdoor fabric found in equipment covers and outdoor furniture protectors. The listing describes a nano PU coating on the fabric and heat-sealed waterproof tape along the seams, both intended to improve water resistance. A silver nano UV coating on the underside is listed as providing UV protection for the hard cover beneath. The cap also features a second-generation vented design that the manufacturer says increases airflow to reduce condensation between the cap and the hard cover. Trapped moisture between layers can accelerate mold growth and hard cover degradation, so ventilation is a meaningful design consideration for any cover cap.
Securing the cap involves a full-perimeter drawstring at the bottom edge and two woven strap buckles positioned at the center. Together, these should keep the cap in place during calm weather and light breezes. However, owners in consistently windy locations or areas prone to strong storms may want to consider additional tie-downs or bungee cords for extra security. A waterproof zipper on the side is included for convenience - it can allow partial access to the hard cover or make it easier to fold and store the cap when the tub is in use. At roughly 2.5 pounds, the cap is light enough that most owners can handle it without assistance.
There are some realistic limitations to keep in mind. This cap will not keep a hot tub warm, prevent heat loss, or replace a damaged hard cover. If the underlying hard cover is waterlogged, sagging, cracked, or no longer insulating properly, adding a cap on top won't fix those problems. The cap also won't bear snow loads - any snow accumulation will still rest on the hard cover's foam core. And while the listed water resistance may handle rain well initially, long-term exposure to standing water, ice, and intense UV will eventually wear down any fabric cover cap, so periodic inspection and cleaning are good practice.
The Enzeno cover cap is a solid budget option for rectangular hot tub owners who want to protect a still-functional hard cover from the elements. It may be especially useful for owners in high-UV climates where sun damage accelerates hard cover deterioration, or for anyone who wants to keep leaves, pollen, and bird droppings off their spa cover between uses. Before purchasing, measure the hard cover's length and width carefully, and verify the rectangular shape matches - this cap won't work on round, octagonal, or irregularly shaped spas. Buyers should also confirm they understand this is a protective cap, not a replacement insulated cover.
The Enzeno cover cap measures 85x67 inches and is listed as fitting rectangular hot tubs sized 84x66, 83x65, or 82x64 inches. This means the cap provides roughly 1 to 3 inches of overhang on each side, depending on the exact spa dimensions. To check fit, measure the top surface of the hard insulated cover that's already on the hot tub - not the interior shell dimensions. If the hard cover has rounded corners, a raised hinge, or an unusual profile, those features could affect how the cap sits and drapes.
Buyers with hot tubs that fall outside the listed size range should be cautious. A spa measuring 80x60 inches, for example, would leave significant excess fabric that could pool water or catch wind. Conversely, a spa measuring 86x68 or larger likely won't be fully covered. The rectangular shape is also important - this cap is not designed for square, round, or irregular spa shapes. Taking a few minutes to measure before ordering can prevent a return and ensure a proper protective fit.
The Enzeno cover cap is designed to act as a barrier between outdoor weather and the hard insulated cover underneath. The listed 420D Oxford fabric with nano PU coating and sealed seams suggests a reasonable level of water resistance for rain and light moisture. The silver nano UV coating on the underside is described as providing UV protection for the hard cover beneath, which may be especially valuable in southern and southwestern U.S. climates where intense sun can crack and fade hard cover vinyl in just a few seasons.
For cold and snowy climates, the cap may help keep ice and snow from directly contacting the hard cover surface, but it won't bear structural snow loads - that responsibility still falls on the hard cover's foam core. In windy locations, the drawstring and buckle straps provide basic hold-down capability, but owners in consistently gusty areas should consider supplemental tie-downs. No fabric cover cap is permanently waterproof, so periodic inspection for wear, seam separation, or coating degradation is a smart part of seasonal spa maintenance.
The Enzeno cover cap includes a full-perimeter drawstring at the bottom and two woven strap buckles at the center to hold the cap in place over the hard cover. In calm to moderate conditions, this combination should keep the cap from shifting or blowing off. The drawstring cinches around the base of the hard cover, while the center buckles add a midpoint anchor that reduces billowing.
For owners in areas with frequent high winds, these securing methods may not be sufficient on their own. Adding aftermarket bungee cords, clips, or weighted edges could improve wind resistance. It's also worth checking that the drawstring and buckle hardware remain functional over time, as UV exposure and temperature cycling can degrade plastic components and elastic cord. Replacing a worn drawstring is easier and cheaper than chasing a cover cap across the yard after a storm.
The Enzeno listing mentions a 30-day no-reason refund policy and states that the company will respond to inquiries within 24 hours or send a replacement cover cap. This is a manufacturer-listed after-sale commitment, and the specific terms and conditions should be confirmed directly with the seller before purchase. No long-term warranty duration is explicitly stated beyond the 30-day return window.
For a budget-priced cover cap, a 30-day return policy provides a reasonable window to verify fit and initial quality. Buyers should inspect the cap promptly upon arrival - checking seam integrity, zipper function, drawstring operation, and overall sizing - so any issues can be addressed within the return period.
Pros
- Helps retain water heat and reduce power consumption by creating an insulating air buffer directly on the water surface
- Lightweight PVC construction makes daily placement and removal effortless compared to heavy hard covers
- Supports exterior spa covers from underneath, helping shed standing rainwater and outdoor debris
- Deflates compactly for convenient off-season storage or travel
Cons
- Air pump is not included, requiring an external manual or electric pump for initial inflation
- Strictly sized for round spas with a 4.1-foot (1.25m) internal diameter and will not fit larger or square tubs properly
- PVC air bladders naturally fluctuate in firmness with outdoor temperature shifts and need occasional topping off
The CosySpa Inflatable Hot Tub Cover is an inflatable thermal bladder designed specifically for round portable and inflatable spas measuring 4.1 feet (1.25 meters) in internal diameter. It primarily serves owners of 2 to 4 person inflatable hot tubs who want to cut down on energy consumption, preserve water heat between soaks, and stop rain from collapsing their existing top cover. If you run a portable spa on your patio or deck and notice high electricity bills or persistent heat loss during cooler evenings, this insulating air cushion offers a practical, targeted solution.
In everyday operation, this inflatable disc sits directly on the water beneath your hot tub's main protective lid or fabric cover. By creating an airtight chamber of trapped air over the water line, the bladder minimizes surface evaporation, which is the leading cause of spa temperature drops. The raised, buoyant profile also pushes the top cover slightly upward in the center. This dome effect prevents standing rainwater and melting snow from pooling in the middle of your outer cover, prolonging the lifespan of your primary cover and keeping fallen leaves or dirt from settling into sagging pockets.
Constructed from grey PVC material, the bladder is engineered to handle routine exposure to treated spa water and outdoor elements. The seamless welded construction creates an airtight barrier that holds air pressure effectively throughout repeated heating and cooling cycles. Because it is lightweight enough to lift out with one hand, the cover simplifies daily spa use. In addition, because there are no foam cores or fabric seams, the risk of moisture absorption or internal waterlogging is completely eliminated.
Setting up the cover requires inflating it with a standard manual foot pump or electric air pump, neither of which comes included in the box. Once filled to a firm, resilient pressure, you simply float the disc onto the water surface before fastening your spa's outer cover. When it is time to soak, the bladder lifts off quickly and can be leaned against a deck chair or set aside on a clean towel. Maintenance is straightforward, requiring only an occasional wipe-down with fresh water or a mild vinyl-safe cleanser to remove any waterline mineral deposits.
Buyers should account for temperature-related air contraction and sizing constraints. Because air expands in warm sunlight and contracts in freezing night air, the cover may occasionally feel soft and require brief air top-offs during colder months. Furthermore, this is not a structural walk-on cover, nor will it serve as a standalone barrier without an outer locking lid to keep pets or debris out. It will also not fit square hot tubs or models with an internal diameter larger or smaller than 4.1 feet (1.25 meters).
For owners of 2-4 person round inflatable spas seeking an affordable way to optimize heat retention, the CosySpa Inflatable Cover delivers dependable utility. Before purchasing, verify your tub by measuring across the inside rim from water wall to water wall, confirming an internal diameter of 1.25 meters (4.1 feet). Having a compatible air pump on hand ensures a quick setup, giving your spa an effective thermal barrier that keeps operating costs in check.
Accurate measurement of your hot tub is critical before purchasing this inflatable thermal cover. The CosySpa bladder is engineered specifically for round hot tubs with an internal diameter of 4.1 feet (1.25 meters), commonly designated as 2 to 4 person models.
To confirm compatibility, measure the distance across the top opening from the inside wall to the opposite inside wall, rather than measuring the exterior footprint. If your tub's interior diameter differs significantly from 4.1 feet, the bladder will either ride too high up the walls or leave wide gaps that allow heat to escape around the perimeter.
Maintaining an inflatable PVC spa cover requires minimal effort but helps extend its usable lifespan. Periodically inspect the inflation valve to ensure an airtight seal, and wipe down the bottom surface with a soft microfiber cloth and fresh water to prevent chemical or mineral buildup.
During seasonal storage, deflate the bladder completely, allow the material to dry thoroughly in a shaded area, and fold it loosely. Avoid dragging the cover across rough concrete, gravel, or abrasive decking surfaces to prevent accidental punctures or pinhole air leaks.
Pros
- Very lightweight and easy to handle, removing the physical strain that comes with heavier rigid or foam-core hot tub covers
- Multiple securing points including drawstrings, a windproof buckle, and six binding buckles help keep the cover in place during wind and storms
- Velcro strip at the water inlet lets you cover the tub without disconnecting the heat pump or water pipes, simplifying daily use
- Reflective green handles are a thoughtful detail for nighttime visibility and quick cover removal
- Compact storage bag included for easy folding and off-season or travel storage
Cons
- This is a soft cover cap, not a rigid foam-core insulated cover, so it won't provide the same level of heat retention or structural support as a traditional hard hot tub cover
- Sized specifically at approximately 73.2x28.3 inches for round 2-person inflatable tubs, so buyers must carefully measure their spa before purchasing to confirm a proper fit
- The lightweight 420D fabric may not hold up as well under heavy snow loads or extreme sustained weather compared to thicker, reinforced cover materials
The DTNESS 73x28-inch cover cap is a soft, lightweight protective cover designed specifically for 2-person round inflatable hot tubs. This is not a rigid foam-core replacement cover or a traditional hard spa cover. Instead, it functions as a fitted cap that drapes over the top and sides of a compatible inflatable spa, shielding it from rain, UV rays, fallen leaves, and other outdoor debris. It's best suited for owners of portable inflatable hot tubs who want an affordable, easy-to-handle protective layer that stores compactly when not needed.
The listed 420D Oxford fabric with a silver coating interior is described as water-resistant, fade-resistant, and rip-resistant. While this construction may help deflect rain and block some UV exposure, buyers should understand that a soft cover cap like this won't match the insulation performance or structural rigidity of a traditional foam-core hot tub cover. Some heat retention benefit is possible since the cover creates a barrier over the water surface, but energy-conscious owners in very cold climates shouldn't expect the same thermal performance as a dedicated insulating cover. The silver lining may help reflect some heat back toward the water, though no specific R-value or insulation rating is provided.
The windproofing system is one of the more thoughtful aspects of this cover cap. DTNESS includes two pull-out drawstrings at the base, a round windproof buckle, and six black binding buckles distributed around the perimeter. For owners in windy locations, this multi-point securing approach should help prevent the cover from blowing off or allowing debris to sneak underneath. The full-strip waterproof Velcro at the water inlet is another practical feature, letting you cover the tub while the heat pump remains connected - no need to disassemble water pipes every time you want to protect the spa.
Daily handling is where this cover cap really shines compared to heavier alternatives. At a listed weight of just 0.2 pounds, virtually anyone can pull it on and off without strain. The two green reflective handles positioned on top and diagonally at the opening make it easy to grab, especially in the dark when you're heading out for an evening soak. The included storage bag means you can fold the cover down to a compact size for travel with a portable spa or for off-season storage in a garage or closet. Cleaning is straightforward - the product description says a damp cloth wipe and sun drying are all that's needed.
There are some realistic limitations to keep in mind. This cover cap won't support snow loads or standing water the way a rigid cover with a tapered foam core would. In regions with heavy snowfall, accumulated weight on a soft fabric cover could stretch or stress the material over time. The fit is specific to round inflatable tubs that match the approximately 73.2x28.3-inch dimensions, and the product notes clearly state it covers only the tub itself, not the heat pump. Buyers should measure their inflatable spa carefully before ordering, since even a few inches of mismatch could leave gaps or create a loose, poorly secured fit.
The DTNESS cover cap makes the most sense for inflatable hot tub owners who want a budget-friendly, ultra-lightweight protective layer for daily use or travel. It's a solid pick for anyone who finds traditional covers too heavy or cumbersome, for vacation-rental operators looking for simple inflatable spa protection, or for seasonal users who need compact storage. Just verify your tub's dimensions against the listed 73.2x28.3-inch size before purchasing, and keep realistic expectations about insulation and snow-load performance given the soft-shell design.
The DTNESS cover cap is listed at 186x72cm, which translates to approximately 73.2x28.3 inches, with an overall dimension listing of 73.2 x 28.3 x 10 inches. It's designed for round 2-person inflatable hot tubs. The product description specifically notes that the cover fits only the tub itself and does not cover the heat pump unit. Before purchasing, measure the full diameter and height of your inflatable spa's tub section to confirm compatibility. Even small dimensional mismatches can result in a cover that's too tight to secure properly or too loose to stay in place during wind.
The Velcro strip at the water inlet is designed so you can leave the heat pump connected while the cover is in place. This is a useful feature for inflatable spas where the pump and water lines attach at a fixed point on the tub wall. If your inflatable hot tub has a different inlet configuration or a significantly different tub diameter, the Velcro opening may not align correctly, so it's worth checking your specific model's layout against the DTNESS design.
The DTNESS cover cap uses a multi-point securing system to resist wind. Two pull-out drawstrings at the base cinch the cover snugly around the lower edge of the tub. A round windproof buckle and six additional black binding buckles distributed around the cover's perimeter add extra hold. For owners in moderately windy locations, this combination should help keep the cover seated during typical gusts and prevent debris from blowing underneath.
That said, no soft cover cap can guarantee complete wind resistance in extreme conditions. In areas prone to sustained high winds or severe storms, additional measures like placing the inflatable spa in a sheltered location or using supplemental tie-downs may be worth considering. The binding buckles and drawstrings are closure features that improve daily security, but they're not rated for storm-force conditions based on available product data.
Maintaining the DTNESS cover cap is straightforward. The product description recommends wiping it down with a damp cloth and letting it air dry in the sun. Since the 420D Oxford fabric is listed as water-resistant and fade-resistant, routine wipe-downs after rain or dusty conditions should keep it looking presentable without special cleaning products.
When the cover isn't in use, the included storage bag lets you fold it down for compact storage. This is especially useful for owners who use inflatable hot tubs seasonally or who travel with a portable spa. Storing the cover dry and clean in the bag between uses may help extend the fabric's useful life by reducing prolonged UV and moisture exposure during off-season periods.
Pros
- Tailored 75 by 47.2-inch oval dimensions fit compact two-person outdoor spas
- Effectively blocks pine needles, airborne dirt, and bird droppings from fouling water
- Weighs only one pound, making routine removal and daily handling virtually effortless
- Provides practical sun protection to help extend the life of spa surfaces or existing tops
Cons
- Limited strictly to 75 x 47.2-inch oval layouts and will not fit square or round spas
- Lightweight barrier build cannot support snow loads, pets, or structural weight
- Requires precise measurement of the spa rim prior to purchase to guarantee proper coverage
The StorMaster Oval Inflatable Hot Tub Cover is a specialized protective covering designed specifically for two-person outdoor jet spas with an oval profile. Measuring 75 inches in length by 47.2 inches in width, this black cover serves spa owners seeking an accessible, lightweight cover solution. It is especially suited for homeowners, couples, and patio spa users who want to protect their spa from everyday debris, shield an aging or damaged top cover, and avoid premature replacement costs.
In everyday backyard settings, exposed hot tub water quickly accumulates dirt, pine needles, and bird droppings, which rapidly deteriorates water chemistry and clogs filtration systems. This StorMaster cover acts as a physical barrier over the spa surface to keep organic contaminants out of the water. By maintaining cleaner water between soaking sessions, it helps reduce the frequency of manual skimming and the volume of sanitizing chemicals needed to maintain balanced water chemistry.
Built with a streamlined, lightweight profile weighing just one pound, this cover focuses on manageable barrier protection and sun shielding. Its black exterior is designed to offer sun protection against harsh UV exposure, helping to preserve the surfaces beneath it. While standard hard foam covers can become heavy or waterlogged over time, this lightweight design provides a straightforward covering layer that sits directly over the oval opening without complex mechanical hinges or lifters.
Using this cover is straightforward because of its manageable size and minimal weight. Placing and removing the cover takes minimal effort, making it practical for solo spa owners or older users who struggle with bulky bi-fold lids. Routine maintenance requires only an occasional rinse with clean water to remove accumulated dust or leaves, allowing the cover to dry before compact storage when the spa is actively in use.
Hot tub owners must understand the design boundaries of this product before purchasing. Because it is tailored specifically for oval 75 by 47.2 inch spas, it is incompatible with square, round, or larger multi-person spas. Additionally, this is a lightweight barrier rather than a structural, load-bearing hard cover; it cannot support the weight of standing snow, pets, or individuals, and it does not feature rigid foam insulation core ratings for severe winter heat retention.
The StorMaster Oval Inflatable Hot Tub Cover is a practical, cost-effective choice for two-person spa owners seeking a simple sun and debris guard or a quick protective cap over a worn existing top. Before ordering, verify your spa shell exterior dimensions along the longest and widest points of the oval lip to ensure the 75-inch by 47.2-inch profile provides full perimeter coverage.
Accurate measurement is critical for oval spa covers because irregular contours leave no room for guesswork. This StorMaster cover features listed dimensions of 75 inches in length and 47.2 inches in width in an oval configuration.
To confirm compatibility with your two-person jet spa, measure across the widest horizontal point and the longest vertical point of your spa shell lip. If your spa dimensions exceed 75 by 47.2 inches, the cover will not provide complete rim-to-rim coverage against airborne debris.
Outdoor exposure presents distinct challenges for hot tubs, including UV degradation and relentless organic debris such as falling leaves, pine needles, and bird droppings. The StorMaster cover provides dedicated sun protection to shield spa surfaces from solar exposure.
By preventing organic waste from decaying in the water, the cover reduces strain on spa filters and minimizes chemical consumption. However, in regions with heavy snowfall or severe winds, users should note that this lightweight cover is designed as a surface barrier rather than a structural winter snow cover.
Pros
- Durable 248 GSM 600D Oxford polyester fabric resists tearing from heavy wind and falling branches
- Eight total tie-down points (four corner buckles and four side straps) provide excellent stability in windy areas
- Deep 20-inch skirt length shields both the hard cover and upper portion of the spa cabinet
- Factory-taped seams and double PU coating help keep standing moisture away from primary cover vinyl
Cons
- Provides no thermal insulation on its own and requires an existing hard cover beneath it to retain spa heat
- Dark black fabric surface can absorb considerable solar heat during peak summer midday hours
- Rainwater can pool on top if the underlying hard spa cover lacks sufficient drainage taper
The Kipiea 85-inch by 85-inch Hot Tub Cover Protector is a heavy-duty fabric cap engineered to shield outdoor spa setups from sun, rain, dirt, and organic debris. Rather than replacing an insulated hard cover, this protective slipcover sits directly over an existing spa lid and cabinet to prevent weather-related wear and tear. It suits homeowners, rental property operators, and spa owners living in regions with intense sun exposure, heavy rainfall, or dense tree canopies who want to avoid premature aging and vinyl cracking on their primary spa covers.
Measuring 85 inches long by 85 inches wide with a 20-inch drop height, this square protector accommodates a wide variety of medium-to-large square hot tub footprints. The extended 20-inch skirt is particularly advantageous because it drapes far beyond the typical 4-to-6-inch skirt of a standard insulating cover, shielding the upper portion of the spa acrylic or exterior cabinet panels from splashback and weather. In everyday use, keeping this protector over the tub keeps fallen leaves, bird droppings, and pine needles off the hard cover, cutting down on deep-cleaning chores before every soak.
Kipiea constructs this cover cap from 248 GSM 600D high-density Oxford polyester, combining a tough tear-resistant exterior with an interior double-layer PU waterproof coating. Factory-taped seams along critical stitch lines help prevent water penetration even during steady rainstorms. To address high winds, the cover incorporates eight independent fastening points: four corner straps with sturdy quick-release buckles rated for heavy pulling forces, along with four adjustable side tension straps. This robust harness system prevents gusty winds from catching under the edges and blowing the cap off the patio or deck.
Installing the Kipiea protector requires simply slipping the lightweight fabric over your closed spa cover and tightening the corner and side buckle straps. Because it weighs significantly less than a traditional vinyl-encased foam cover, removing it prior to using the hot tub takes only a minute or two. Once unbuckled, it folds up compactly for storage in a deck box or patio cabinet while bathers enjoy the spa. Maintenance is straightforward, requiring occasional rinsing with a garden hose or spot cleaning with mild soapy water to remove accumulated dust and pollen.
Hot tub owners should recognize that this cover cap is strictly an outer protective shell and provides no structural support or thermal insulation on its own. It cannot support snow loads without a rigid hard cover underneath, and it does not retain spa heat independently. Additionally, because the cover is made from water-resistant fabric, heavy rain can accumulate in shallow puddles on top if the underlying hard cover does not have a pronounced drainage taper, requiring manual clearing after severe storms.
For spa owners looking to preserve an expensive insulated vinyl cover and reduce cabinet fading from continuous outdoor exposure, the Kipiea 85 x 85 x 20-inch protector offers practical, budget-friendly insurance. Before ordering, verify your hot tub exterior cabinet and hard cover dimensions to confirm that 85 inches square will provide a comfortable slip-on fit without excessive tightness around the corners.
Accurate sizing is essential when purchasing a slip-on cover protector. The Kipiea cover protector measures precisely 85 inches long by 85 inches wide with a 20-inch vertical skirt drop, designed specifically for square spa shells and cabinets.
Spa owners should measure their closed hard cover across the widest points of length and width, including any overhang beyond the acrylic shell. If your hard cover measures between 82 and 84 inches square, this 85-inch protector will provide an easy, relaxed fit that slips on and off smoothly without snagging.
The 20-inch drop height extends down past standard cover skirts to cover the upper section of your hot tub cabinet. If your spa features raised topside control panels, spa-side handrails, or mounted cover lifter brackets, verify that the 20-inch skirt can drape freely over the perimeter without catching on external hardware.
Outdoor spas face year-round environmental hazards including intense UV radiation, heavy rainfall, falling tree sap, and blustery winds. The Kipiea protector uses 248 GSM 600D Oxford fabric treated with a UV-resistant coating designed to shield sensitive vinyl covers from drying out and surface fading.
Water resistance is supported by a double-layer interior PU barrier and taped seams designed to handle high water pressure without seeping through to the spa below. This barrier prevents moisture from soaking directly into existing hairline cracks or vinyl seams on an older primary cover.
Wind management relies on eight total attachment straps. Four corner straps with heavy-duty quick-release buckles clamp the corners securely, while four additional long side straps pull the fabric taut against the cabinet walls. This design helps keep the protector anchored even in open, breezy backyard environments.
Routine maintenance preserves both the appearance and water resistance of the Kipiea 600D fabric over seasons of outdoor exposure. Regularly brushing off fallen twigs, leaves, and pine needles prevents organic matter from decomposing against the Oxford weave.
To clean dirt, pollen, or bird droppings, simply hose down the exterior surface with clean tap water and wipe it down with a soft microfiber cloth or sponge using mild dish soap. Avoid harsh chemical cleaners, bleach, or stiff scrubbing brushes, as these can wear away the protective PU coating and UV treatment.
Before folding the protector for seasonal storage or extended non-use, ensure the fabric is completely dry on both sides to prevent mildew odors. Store the folded protector in a dry, shaded outdoor storage box or garage away from rodents and sharp garden tools.
FAQs
How do I measure my two-person spa for a replacement cover?
Measure the internal diameter or internal length and width of your tub at its widest points, not the outer shell. For round and oval inflatable spas, the internal diameter determines whether an inflatable lid like the CosySpa Inflatable Hot Tub Cover (available in 4.1 ft or 5.2 ft diameters) will sit correctly on the water surface. For cap-style covers like the DTNESS 73″x28″ 2-Person Round Hot Tub Cover, you need the outer dimensions because the cover drapes over the entire tub body. A cover that’s too small won’t seal, and one that’s too large will sag and collect rainwater.
What’s the difference between an inflatable lid and a cap-style cover for a small hot tub?
An inflatable lid sits directly on the water surface inside the tub and acts as a floating insulation barrier. It reduces heat loss and evaporation but doesn’t protect the outer shell from UV, rain, or debris. A cap-style cover (sometimes called a cover cap or protector) wraps over the entire tub and is made from materials like 420D or 600D Oxford fabric. Cap-style covers like the Hot Tub Cover Outdoor Waterproof Square SPA Covers require an insulated hard cover underneath for heat retention. Many two-person spa owners use both types together: an inflatable lid for insulation plus a cap for weather shielding.
Are brand-specific covers necessary, or can I use a universal one?
It depends on your spa’s shape and dimensions. The Oval 1-2 Person Hot Tub Cover from Mosener is explicitly listed as compatible only with Mosener hot tubs, so using it on another brand could result in a poor fit. The Inflatable Square Hot Tub Cover Replacement from Uppernut lists broader compatibility with Intex, Coleman, and SaluSpa square tubs in the 4-5.4 ft range. Always compare your tub’s internal measurements against the cover’s listed dimensions rather than relying on brand name alone.
Can a cap-style cover replace an insulated hard cover for heat retention?
No. Cap-style protectors made from Oxford fabric are designed for weather protection, UV shielding, and debris control, not thermal insulation. Both the Enzeno Outdoor SPA Hot Tub Cover Waterproof and the CATOTEL square cover explicitly state they cannot be used alone without an insulated hard cover underneath. If your primary concern is reducing heat loss on a small inflatable spa, an inflatable PVC lid that sits on the water surface is a more practical standalone option. You can also explore our picks for collapsible hot tub covers with anti-sink feet for more portable insulation ideas.
How important is windproofing for a compact hot tub cover for two people in 2026?
Very important if your spa sits on an exposed patio or deck. Lightweight inflatable lids can blow off in strong gusts, and even cap-style covers need secure fastening. The Kipiea 600D Outdoor Waterproof Square Hot Tub comes with 4 side straps and 4 corner straps rated to support over 176 pounds of force, which is among the sturdiest windproof setups in this group. The DTNESS 2-person cover uses pull-out ropes, a round windproof buckle, and six binding buckles. If you live in a windy area, look for multiple anchor points and adjustable drawstrings rather than relying on gravity alone.
Will an inflatable cover work in freezing temperatures?
Inflatable PVC covers can help reduce surface heat loss and condensation, but they aren’t a substitute for rigid foam insulation in harsh winter climates. The 5.2 Ft Inflatable Hot Tub Cover from Huaerle mentions helping prevent condensation and freezing, but keep in mind that PVC can stiffen and become less pliable in extreme cold. If you’re in a region with heavy snowfall, pairing an inflatable lid with a weatherproof outer cap gives you both insulation at the water surface and protection from snow accumulation on top.
Does the black color on an inflatable cover actually help retain heat?
A black surface does absorb more solar radiation than a white or grey one when exposed to direct sunlight. The Inflatable Square Hot Tub Cover Replacement from Uppernut highlights this as a feature, noting the black heat-absorbing surface can help maintain a warmer environment around the spa during cooler seasons. The actual temperature benefit will vary based on sun exposure, ambient temperature, and how long the cover sits in direct light. It’s a nice bonus for outdoor setups that get consistent sun, but it won’t replace proper insulation on its own. Also note that Uppernut advises against exposing this cover to water temperatures above 122 degrees F (50 degrees C).


Write Your Review
No reviews yet. Be the first to share your experience!