Keeping Your Spa Protected Outdoors Starts With the Right Cover
Hauling a portable hot tub to an outdoor event sounds like a blast, but leaving it exposed to sun, rain, wind, and debris can turn relaxation into a cleanup headache fast. A flimsy tarp won’t cut it. You need a music festival hot tub cover that can handle unpredictable weather, keep dirt and leaves out of the water, and stay put when gusts pick up. The 4 options we’ve compared for 2026 range from lightweight solar blankets built for heat retention to heavy-duty 600D and 1000D polyester protectors with windproof strap systems, plus a custom-fit insulated replacement cover with R19 insulation value and marine-grade vinyl. Prices sit between $39.99 and $489.98, so there’s something here whether you’re covering a temporary setup or protecting a permanent backyard spa you also bring to seasonal gatherings. If you’re also shopping for a genuine hot tub cover with a more traditional rigid build, that’s worth a look too.
Fit matters more than most buyers expect. A cover that’s too small lets rain pool on the spa shell, and one that’s too large flaps in the wind. The rectangular Kipiea option measures 85″ L x 68″ W x 20″ H, while the QH.HOME cover is an 85″ x 85″ square that fits tubs between 81″ and 85″. The MADHOLLY solar blanket covers a 7 x 7 ft area and can be trimmed to irregular shapes. Then there’s The Cover Guy, which is custom-made to your exact dimensions with a +/- 0.5″ tolerance. Knowing your spa’s shape, length, width, and depth before ordering is the single biggest step toward a snug, protective fit. Below you’ll find the full lineup, followed by real-world buyer questions that can help you narrow things down. If budget is tight, you might also check out options for an anti-sink hot tub cover under 30 dollars.
Pros
- Heavy-duty 600D Oxford fabric with interior taped seams provides dependable rain and debris protection
- Eight adjustable straps with heavy-duty buckles offer reliable hold during gusty wind conditions
- Protects expensive vinyl hard covers from UV deterioration and organic staining
- Lightweight 4.5-pound construction is easy to take on and off for daily spa use
Cons
- Fabric protector only; contains no insulating foam and does not retain water temperature on its own
- Water can pool on the surface during heavy rains if the underlying spa cover lacks a steep runoff taper
- Fixed 85-inch by 68-inch dimensions mean it will not properly fit larger square or circular hot tubs
The Kipiea 85x68x20 inch hot tub cover protector serves as an exterior protective shield designed to slip directly over an existing rectangular hot tub and its thermal hard cover. It targets spa owners facing extreme sun exposure, falling debris, bird droppings, and blowing storms who want to extend the lifespan of their costly hard foam cover. Rather than replacing a damaged primary cover, adding this lightweight 4.5-pound protective barrier helps prevent surface cracking, vinyl fading, and premature seam failure on the main spa investment.
Sized at 85 inches in length by 68 inches in width with a generous 20-inch side drop, this cover cap accommodates rectangular spa configurations and covers both the thermal lid and the upper cabinet perimeter. Hot tub owners in sunny or coastal regions frequently battle intense UV rays that degrade vinyl seams, while rural or wooded properties deal with sap, leaves, and dirt settling into hard cover crevices. Placing this cap over the spa creates an easily cleanable barrier that keeps the primary cover clean and reduces routine exterior maintenance.
Constructed from 248 GSM 600D Oxford polyester, the material is treated with a double-layer polyurethane (PU) waterproof coating and taped interior seams rated by the manufacturer to withstand water pressure up to 20,000 Pa. To handle aggressive backyard winds, the cover integrates four long side straps and four corner straps equipped with heavy-duty buckles rated for over 176 pounds of force. The woven fabric also features a specialized UV-resistant coating designed to block high amounts of solar radiation, preventing the fabric itself from becoming brittle across seasons.
Managing the Kipiea protector is straightforward thanks to its modest 4.5-pound weight, allowing a single person to unfold, drape, and latch it securely in just a few minutes without needing a cover lifter. The eight separate buckle points allow owners to tension the bottom skirt snugly around the spa cabinet, preventing gusts from getting underneath the fabric. For daily soaking, simply unbuckle the quick-release clips, fold the cap, and stow it spa-side until closing time.
Buyers must recognize that this product is a protective outer fabric cap, not a rigid insulating replacement cover. It contains no foam core and provides no thermal insulation or structural load capacity for heavy snow loads. Additionally, because it is a flexible fabric draped over a rectangular surface, standing rainwater or melted snow can pool in low spots if the underlying hard cover does not have a sufficient crown or taper to shed runoff.
For owners seeking an affordable way to defend their primary hot tub cover from premature weather degradation, the Kipiea protector is a practical and durable outdoor shield. Before purchasing, verify that your spa cabinet and existing hard cover measurements do not exceed 85 inches by 68 inches, ensuring sufficient clearance for the 20-inch drop to fasten snugly.
This protector is specifically manufactured for rectangular spas with maximum dimensions of 85 inches in length and 68 inches in width. Hot tub owners should measure their spa with the primary hard cover installed, measuring from the outer edge of the cover rim on both the long and short sides to confirm proper clearance.
The 20-inch skirt length provides generous vertical overhang that extends past the hard cover down onto the spa cabinet siding. This deep drop shields the cabinet corners and seam lines from driving rain while providing ample material for the integrated tie-down straps to cinch firmly against the spa structure.
High winds can easily dislodge standard hot tub caps, but this model incorporates an eight-point securing system composed of four corner straps and four long side straps. Each strap connects through heavy-duty windproof buckles rated by the manufacturer to withstand over 176 pounds of pull force.
By pulling the adjustable straps tight against the spa cabinet, owners create a firm, tailored fit that resists ballooning during blustery storms. This tight seal prevents leaves, dust, and windborne debris from working their way under the protector and accumulating on your primary vinyl cover.
Pros
- Durable 1000D fabric with manufacturer-listed IP65 waterproof build keeps standing rain and debris off the spa
- Wraparound strap system helps secure the cover cap during high outdoor winds
- Integrated air vents reduce moisture accumulation underneath and release air pressure
- Lightweight at under seven pounds, making it easy to put on, remove, and store
Cons
- Protective fabric cap design does not include an insulating foam core and cannot replace a thermal hard cover
- Only accommodates square hot tub dimensions between 81 and 85 inches, requiring exact spa shell measurement
- Water may pool on top during torrential rains if not supported by an underlying convex or tapered hard cover
The QH.HOME 85x85 Square Hot Tub Cover is a protective fabric spa cap engineered to safeguard outdoor square hot tubs and their primary hard covers from severe weather and debris. Measuring 85 by 85 inches, this cover protector is sized specifically for spa shells measuring between 81 and 85 inches. It best suits outdoor spa owners, vacation rental managers, and homeowners looking to shield their expensive insulating foam covers from direct sun exposure, heavy rain, falling leaves, and bird droppings.
Real-world usefulness centers on debris deflection and weather resistance across shifting seasons. Built with a manufacturer-listed IP65 waterproof rating, the 1000D fabric prevents storm runoff from penetrating directly into the spa or dirtying the underlying cover. An upgraded air vent design allows trapped internal moisture to evaporate, which helps prevent musty smells from forming while relieving wind pressure during blustery days. Hot tub owners can quickly unclip the cover, fold it aside, and access clean water without spending time skimming pine needles or scrubbing grime off the acrylic shell.
Regarding build quality, the cover is manufactured from heavy-duty 1000D woven material in an understated wheat color. The manufacturer notes that this fabric remains pliable in sub-freezing winter conditions rather than stiffening and cracking, while also resisting color fading after prolonged summer UV exposure. A single wraparound securing strap provides tension across the perimeter of the hot tub cabinet to prevent the cover from flapping loose or blowing away when high winds sweep across an open backyard or patio.
Handling and everyday maintenance are straightforward due to the product's light 6.9-pound weight. Unlike bulky rigid covers that demand multiple people or specialized mechanical lifters to remove, this soft cover cap can be placed, straightened, and buckled by a single person in moments. When it is time to use the hot tub, the flexible material folds down compactly for storage on a spa bench or inside a deck box. Routine care involves spraying down the fabric exterior with a garden hose to rinse away accumulated pollen, dirt, and tree debris.
A key limitation to recognize is that this product functions strictly as a protective fabric cap and does not replace a rigid insulating foam cover. Weighing just under seven pounds with a flat profile, it offers no thermal insulation or foam core to retain water heat. If used alone over an open spa, standing rainwater may pool in the center without an underlying convex or tapered hard cover to facilitate runoff. Hot tub owners in cold climates should treat this cap as a sacrificial outer layer over their existing insulated hard cover rather than a standalone thermal barrier.
For hot tub owners seeking to prolong the lifespan of their existing spa setup, this cover cap offers practical debris protection and storm security at a manageable weight. Before purchasing, verify that your hot tub cabinet or primary cover measures between 81 and 85 inches square to ensure an adequate fit. With proper measurement, this protective cover provides a dependable, low-maintenance shield against tough outdoor elements.
The QH.HOME cover cap measures 85 inches long by 85 inches wide and is designed to fit square hot tubs measuring between 81 and 85 inches across. Hot tub owners should measure the outermost dimensions of their spa cabinet or existing hard cover rather than internal acrylic seating dimensions. Choosing a cover cap slightly larger than the spa allows the skirt to drape naturally over the perimeter, facilitating proper coverage and allowing the wraparound strap to secure firmly.
Outdoor hot tub covers face intense exposure to direct ultraviolet radiation, seasonal rain, and freezing winter temperatures. This protector utilizes 1000D woven fabric with an IP65 waterproof rating designed to maintain flexibility during sub-zero conditions and resist fading in prolonged sunlight. The integrated air vents assist by providing an exit path for under-cover humidity, which mitigates condensation build-up and protects the underlying spa cover from mildew development.
Pros
- Thicker 16 mil construction compared to many solar blankets in the 8-12 mil range, which may improve durability and heat retention over time
- Generous 7x7 ft size accommodates most standard square hot tubs and can be cut down to fit smaller or non-square shapes
- Lightweight and easy to handle for all ages, including older users who may struggle with heavy rigid covers
- Helps reduce water evaporation and heating costs, making it practical for budget-conscious and energy-conscious households
- Can be used alongside a rigid hard cover to add an extra layer of insulation and reduce condensation buildup
Cons
- This is a floating solar blanket, not a rigid or insulated spa cover - it does not provide structural protection, security, or locking capability
- The blanket may arrive with creases from packaging and requires time laid flat with weight on top to flatten out before use
- Long-term durability in high-UV or chemically treated water is not specified - bubble material may degrade over time with sustained chemical and sun exposure
The MADHOLLY 7x7 FT solar blanket is a floating thermal cover, not a rigid replacement hot tub cover. It sits bubble-side down directly on the water surface of a square hot tub, acting as a heat-retention layer that reduces evaporation and helps maintain water temperature between soaks. This type of product is best suited for hot tub owners looking to cut down on heating time and energy costs, especially those who already have a hard cover and want an additional insulation layer underneath it. It's also a practical choice for first-time spa owners, vacation-rental operators, and budget-conscious households who want a simple, affordable way to keep their water warmer longer.
The MADHOLLY solar blanket measures 7 x 7 feet (approximately 84 x 84 inches), which should cover most standard square hot tubs. If your tub is smaller, round, octagonal, or has an irregular shape, the blanket can be trimmed to fit using scissors. This trim-to-fit approach is common with solar blankets, but buyers should measure their tub's interior water surface carefully before cutting - once trimmed, the material can't be added back. The listed weight of approximately 4.6 pounds makes it easy for a single person to lay it on the water, pull it off, fold it, and store it, which is a notable advantage for older users or anyone tired of wrestling with a heavy, waterlogged rigid cover.
At 16 mil thickness, the MADHOLLY blanket is thicker than many competing solar blankets that typically range from 8 to 12 mil. According to the manufacturer, this added thickness may provide better heat preservation and longer bubble life compared to thinner alternatives. The bubble side faces the water, creating an air-pocket insulation layer, while the smooth side faces up. This configuration is designed to trap heat at the water surface and absorb solar energy to help warm the water passively. The manufacturer also states the blanket can help prevent up to 95% of water evaporation loss, which could reduce the frequency of water refills and chemical rebalancing.
Setup is straightforward: lay the blanket bubble-side down on the water surface and trim as needed. One thing to note is that the blanket may arrive with fold creases from packaging. The manufacturer recommends laying it flat and placing heavy objects on top for a few hours to help it flatten out before first use. For daily handling, most owners simply pull the blanket off before soaking and lay it back on afterward. Some hot tub owners use a solar blanket like this underneath their rigid hard cover to add insulation and reduce condensation on the hard cover's underside, which can help extend the life of the rigid cover's foam core.
There are realistic limitations to keep in mind. A solar blanket is not a substitute for a rigid insulated hot tub cover when it comes to structural protection, debris exclusion, security, or child safety. It won't lock, it won't keep animals or children out, and it won't hold up against wind, snow, or heavy rain on its own. Buyers in cold or snowy climates should treat this as a supplemental heat-retention layer, not a standalone cover. Additionally, the long-term durability of the bubble material when exposed to hot tub chemicals like chlorine or bromine and sustained UV exposure is not specified by the manufacturer, so replacement frequency will vary based on water chemistry and sun conditions.
The MADHOLLY 7x7 FT solar blanket is a solid value for hot tub owners who want to reduce heating costs and water evaporation without a major investment. It's especially useful as a companion to a rigid hard cover, adding a secondary insulation barrier right at the water surface. Before purchasing, measure your hot tub's interior water surface dimensions to confirm the 7x7 ft blanket will cover your tub adequately or can be trimmed to fit. Buyers who need structural protection, locking security, or a standalone all-weather cover should look at rigid insulated spa covers instead.
The MADHOLLY solar blanket measures 7 x 7 feet (approximately 84 x 84 inches or 210 x 210 cm) and is designed for square hot tubs. Since this is a floating blanket rather than a fitted cover, it does not have a skirt, hinge, corner radius, or structural frame. It simply lays flat on the water surface inside the tub.
If your hot tub is smaller than 7 x 7 feet, or if it has a round, octagonal, or irregular shape, the blanket can be trimmed to fit. The manufacturer suggests placing the blanket over the tub, marking the edges, and cutting along the marks. Measure your tub's interior water surface dimensions before purchasing to ensure adequate coverage. Keep in mind that trimming is permanent, so take your time with measurements and cuts.
This blanket is not sized to fit as an exterior cover over the tub's cabinet or lip. It floats inside the tub on the water. Buyers looking for a cover that sits on top of the spa shell with an overlapping skirt should look at rigid or soft spa covers instead.
A floating solar blanket like the MADHOLLY sits on the water surface inside the tub, so it is not directly exposed to rain, snow, or wind the way a rigid exterior cover would be. However, if used outdoors without a hard cover over it, the smooth top surface will be exposed to UV rays and weather elements.
The manufacturer does not specify a UV-resistance rating or expected lifespan under sustained sun exposure. In hot, high-UV climates like the American Southwest, prolonged direct sun exposure may accelerate bubble degradation over time. Using the solar blanket underneath a rigid hard cover can help protect it from UV and weather while still providing the heat-retention and evaporation-reduction benefits.
For cold-climate users, this blanket can serve as a valuable supplemental insulation layer. By trapping heat at the water surface, it may help reduce heat loss and shorten reheat times during winter months. However, it should not be relied upon as a standalone cover in freezing conditions - a rigid insulated cover is still necessary for meaningful cold-weather protection.
Maintaining the MADHOLLY solar blanket is relatively simple. After removing it from the water, rinse it with a garden hose to remove any chemical residue or debris. Allow it to air dry before folding and storing. Avoid leaving it crumpled or folded in direct sunlight for extended periods, as heat buildup could affect the bubble material.
Over time, hot tub chemicals like chlorine and bromine may affect the blanket material. The manufacturer does not specify chemical compatibility or a recommended replacement interval, so inspect the bubbles periodically for signs of cracking, flattening, or deterioration. When bubbles begin to lose their shape or detach, the blanket's insulation effectiveness will decrease, and replacement should be considered.
Store the blanket flat or loosely rolled when not in use. Some owners keep a dedicated storage bin or hang the blanket over a railing near the hot tub for quick access. The lightweight design at approximately 4.6 pounds makes handling and storage easy for most users.
Pros
- Custom dimension sizing up to 8x8 feet ensures a proper perimeter seal when accurate measurements are supplied.
- Tapered foam structure facilitates natural drainage of precipitation and melting snow to reduce standing puddles.
- Vapor-wrapped foam cores are designed to minimize moisture absorption and slow down cover weight gain over time.
- Integrated locking safety straps and reinforced handles assist with secure closure and daily spa access.
Cons
- Exact measurements must be verified prior to ordering, as custom-made covers cannot simply be exchanged for a standard off-the-shelf size.
- The standard package uses medium-density foam, requiring an optional upgrade for those needing heavy 2-pound high-density foam in severe snow zones.
- Regular vinyl cleaning and UV conditioning are still required to keep the exterior marine-grade material pliable and clean.
The Cover Guy Custom Replacement Hot Tub Cover is designed for spa owners dealing with an old, waterlogged, or deteriorating lid that no longer seals heat effectively. Tailored to the specific dimensions of your hot tub, this replacement hard cover suits homeowners, vacation rental managers, and families looking for a snug fit on square tubs up to 8 by 8 feet. Instead of settling for a generic cover that leaves drafty gaps around the rim, ordering a custom-dimensioned unit helps maintain proper perimeter contact across your acrylic shell or cabinet top.
Heat containment and weather resistance are central to how this replacement cover functions in changing outdoor conditions. The cover features a sloped design with 6-inch, 5-inch, or 4-inch taper configurations that direct rainwater, sleet, and melting snow away from the center fold. Combined with marine-grade vinyl and a listed insulation rating of R19, the tapered foam core helps trap heat inside the spa water and reduce heat loss during chilly evenings or seasonal cold snaps.
Internal water absorption is the most common reason spa covers fail, and this model addresses moisture accumulation with a specialized protective wrap around the foam cores. Marketed with zero water absorption technology, the vapor barrier is engineered to block rising steam and moisture vapors from soaking directly into the interior foam. Marine-grade vinyl exterior construction, reinforced lifting handles, and durable perimeter stitching provide the structural durability needed to withstand continuous outdoor UV exposure and regular spa use.
Daily operation is straightforward thanks to an estimated 45-pound baseline weight that reduces the physical strain of opening and closing your hot tub. Reinforced straps with child-resistant safety locks help anchor the cover down against sudden wind gusts while supporting standard residential spa safety expectations. The center hinge configuration folds smoothly, making it compatible with manual handling or integration into most standard cabinet-mounted cover lifters that accept hard folding covers.
While a custom-fit cover provides an excellent seal, it places the responsibility of precise measurement entirely on the buyer before ordering. Because the cover is made to order with an allowable tolerance of plus or minus 0.5 inches, measuring your spa shell width, length, and corner radius accurately is critical to avoid overhang or undersized edges. Additionally, spa owners in areas with extreme, heavy snowfall may want to consider upgrading to the manufacturer-listed 2-pound high-density foam core to handle heavier seasonal snow loads.
For hot tub owners seeking to restore energy efficiency, lower heater cycle times, and replace a heavy, water-soaked lid, The Cover Guy Custom Replacement Hot Tub Cover offers a practical and protective upgrade. Its blend of marine vinyl, tapered water-shedding geometry, and a 3-year manufacturer warranty delivers dependable everyday performance. Before purchasing, take double-checked measurements of your tub outer dimensions and corner radius to ensure your custom order fits your cabinet seamlessly.
To ensure your replacement cover fits properly, measure the outside dimensions of your spa shell or acrylic lip rather than your old, warped cover. For square or rectangular spas, record the exact length and width, keeping in mind the manufacturer tolerance of plus or minus 0.5 inches on the finished build.
Check your corner radius carefully using a carpenter square or straight edge against the curve of the spa corner. An accurately measured corner radius ensures the cover skirt drapes smoothly over the cabinet corners without bunching, stretching, or leaving unsealed gaps where heat can escape.
The cover is built around an insulated foam core featuring a listed R19 thermal rating designed to reduce thermal loss from your spa water. By maintaining a continuous barrier against escaping heat, the cover helps reduce the runtime of your hot tub heater throughout colder months.
The foam is tapered across a 6, 5, or 4-inch slope to promote natural drainage of rain and melting snow toward the perimeter. For owners in regions that experience severe winter snow accumulation, the manufacturer offers upgrade options to higher-density 2-pound foam with a 6-to-4 inch taper to provide added structural firmness under seasonal weather loads.
Waterlogging is the primary cause of spa cover degradation, occurring when rising hot tub steam gradually penetrates into the raw foam core. The Cover Guy addresses this issue by wrapping the interior foam with a protective vapor barrier designed to limit moisture intrusion and delay the heavy water weight gain that plagues aging covers.
Keeping your spa water balanced and maintaining proper chemical levels further protects the underside vapor barrier and marine vinyl from premature chemical damage. Periodically ventilating your hot tub after shock treatments will help extend the effective service life of both the vapor wrap and the vinyl exterior.
FAQs
What measurements do I need before ordering a music festival hot tub cover?
You need the exact length, width, and height (or depth) of your hot tub shell. A cover protector like the Kipiea 600D is sized at 85″ x 68″ x 20″, so it suits rectangular tubs within those outer dimensions. The QH.HOME square cover fits spas between 81″ and 85″ on each side. For custom-fit insulated covers like The Cover Guy Premium Hot Tub Cover, you’ll also want your corner radius and hinge orientation since each cover is built to the dimensions you provide. Measuring before you buy prevents the frustration of a cover that sags, gaps at the corners, or doesn’t reach the cabinet edge.
How do windproof straps help at an outdoor event?
Straps keep the cover locked to the spa shell so gusts can’t lift or flip it. The Kipiea 600D Outdoor Waterproof Rectangular Hot Tub includes 4 side straps and 4 corner straps with buckles rated to support over 176 pounds of force. The QH.HOME 85×85 Square Hot Tub Cover uses a wrap-around strap system designed to prevent any flapping. At a music festival or outdoor gathering, wind conditions can change fast, so a strap-and-buckle setup is much more reliable than simply draping a cover over the tub.
Is a solar blanket like the MADHOLLY the same as a hard or soft spa cover?
No, they serve different purposes. The MADHOLLY 7x7FT Square 16Mil Heavy-Duty Spa Hot Tub is a floating thermal solar blanket that sits bubble-side down on the water surface. It’s designed to reduce up to 95% of water evaporation, retain heat, and cut heating time. It doesn’t replace a rigid or soft outer cover that protects from debris, rain, and unauthorized access. Many spa owners use a solar blanket underneath a traditional cover for maximum heat retention and energy savings. The 16 mil thickness is notably thicker than the standard 8-12 mil blankets, and you can trim it to fit irregular tub shapes.
What makes The Cover Guy different from the other covers listed here?
It’s a custom-made insulated replacement spa cover rather than a slip-on protector or solar blanket. The The Cover Guy Premium Hot Tub Cover features medium-density interior foam with a stated R19 insulation value, marine-grade vinyl, zero water absorption technology to prevent waterlogging, and locking straps that meet or exceed ASTM standards. It’s built to your exact measurements with a +/- 0.5″ tolerance. The tradeoff is price: it sits near $489.98, while the cover protectors and solar blankets in this list are under $50. But if you need a full replacement cover with real insulation and a vapor barrier, this is the only option here that fills that role. A high-back hot tub cover for backyard use may also be worth comparing if your spa has an elevated back section.
Can I use a cover protector on top of my existing insulated spa cover?
Yes, many spa owners layer a cover protector over their insulated hard cover to extend its life. A 600D or 1000D polyester protector like the Kipiea or QH.HOME shields the vinyl from UV damage, bird droppings, tree sap, and rain, which are all common causes of cracking and fading on exposed spa covers. This layering approach can add years to an insulated cover’s useful life, especially in high-UV or heavily wooded environments.
How do I know if a cover protector’s waterproofing will hold up?
Look at the fabric denier, coating type, and seam construction. The Kipiea cover uses 248GSM 600D Oxford fabric with a double-layer PU waterproof coating and waterproof tape at the seams, rated to withstand water pressure up to 20,000 Pa. The QH.HOME uses 1000D fabric with an IP65 waterproof rating and includes upgraded air vents so moisture doesn’t get trapped underneath. Seam tape is a detail many cheaper covers skip, and it’s often where leaks start. If you plan to leave your spa outdoors through storms, sealed seams and a high-denier fabric make a noticeable difference in how dry your tub stays.
Do any of these music festival hot tub cover options work with a cover lifter?
It depends on the cover type. Cover lifters are designed for rigid or semi-rigid insulated spa covers with a center hinge, like The Cover Guy Premium Hot Tub Cover. Slip-on protectors (Kipiea, QH.HOME) and floating solar blankets (MADHOLLY) don’t have hinges or the structural rigidity a lifter arm needs to grip and fold. If daily ease of opening and closing matters to you, pairing a custom insulated cover with a compatible lifter is the most practical setup. Just verify that you have enough clearance behind or beside the spa for the lifter’s arm to swing the folded cover out of the way.


Write Your Review
No reviews yet. Be the first to share your experience!